Dayton Audio - DS270-8
A 10" Designer Series Woofer
Specifications
- Power Handling
- 200W
- Impedance
- 8Ω
- Size
- 10
- Category
- Woofer
- Re
- 5.4 Ohms
- Fs
- 31.6 Hz
- Qms
- 2.4
- Qes
- 0.54
- Qts
- 0.44
- Rms
- Mms
- 51.5 g
- Cms
- 0.49 mm/N
- Vas
- 87.7 L
- Sd
- 353 cm2
- BL
- 10.1 Tm
- Xmax
- 5.5 mm
- Le
- 1.25mH @ 1 kHz
- SPL
- 90.7 dB @ 2.83V/1m
- EBP
- Vd
- 194.1 cm3
- Mmd
Description
The DS270-8 is an 8-ohm speaker driver specifically developed for speaker designers. Part of Dayton Audio's Designer Series, it combines performance with an attractive design, putting performance first while maintaining elegant styling
Technical Specifications:
Resonance frequency: 31 Hz
Power handling: 200W
Sensitivity: 88dB
Maximum linear excursion (Xmax): 5.5mm
Magnet type: Ferrite
Recommended sealed enclosure: 1.28 ft³ with F3 at 55 Hz
Recommended vented enclosure: 3.38 ft³ with F3 at 28 Hz
Features:
Coated paper cone with half-roll rubber surround for durability and accurate reproduction
Vented pole piece for minimized power compression and maximized reliability
Cosmetic frame with low profile lip, designed for front mounting without requiring countersinking
Smooth frequency response and linear roll-off that simplifies filter desig
Generous Xmax capability that allows for moderate bass boost to tailor the response