Dayton Audio - DS215-8
An 8" Designer Series Woofer
Specifications
- Power Handling
- 160W
- Impedance
- 8Ω
- Size
- 8
- Category
- Woofer
- Re
- 5.8 Ohms
- Fs
- 34.3Hz
- Qms
- 1.75
- Qes
- 0.38
- Qts
- 0.31
- Rms
- Mms
- 29.7g
- Cms
- 0.72mm/N
- Vas
- 43.1L
- Sd
- 211.2cm2
- BL
- 9.89 Tm
- Xmax
- 5.5mm
- Le
- 1.25mH @ 1kHz
- SPL
- 89.9 dB @ 2.83V/1m
- EBP
- Vd
- 116.2 cm3
- Mmd
Description
The DS215-8 is an 8-ohm speaker driver developed for speaker designers. Part of the Designer Series, it combines performance with attractive design, featuring a coated paper cone and half-roll rubber surround for durability and accurate sound reproduction
Technical Specifications:
Resonance frequency: 34 H
Power handling: 160W
Sensitivity: 88dB
Maximum linear excursion (Xmax): 5.5mm
Magnet type: Ferrite
Recommended sealed enclosure: 0.28 ft³ with F3 at 87 Hz
Recommended vented enclosure: 0.6 ft³ with F3 at 52 Hz
Features:
Cosmetic frame with low profile lip, designed for front mounting without requiring countersinking
Vented pole piece for minimized power compression and maximized reliability
Smooth frequency response and linear roll-off that simplifies filter design
Generous Xmax capability that allows for moderate bass boost to tailor the response