FaitalPRO 10FE300
10" Professional Woofer 8 Ohm
Sold by SDLabs
$142.00
Ships in 3–7 business days
Ships from United States. Shipping $9.99 in-country, not available international.
Manufacturer list price: $142.00
| Size | 10" |
| Impedance | 8 Ω |
| Power | 250 W |
| MSRP | $142.00 |
| Used in | 0 designs |
Factory specs
From the manufacturer's datasheet
- Re DC resistance
- 5.8 Ω
- Fs Resonance frequency
- 50 Hz
- Qms Mechanical Q
- 13.1
- Qes Electrical Q
- 0.54
- Qts Total Q
- 0.52
- Rms Mechanical resistance
- 0.9 kg/s
- Mms Moving mass
- 35.9 g
- Cms Suspension compliance
- 0.28 mm/N
- Vas Equivalent volume
- 50.404 L
- Sd Piston area
- 358 cm²
- BL Force factor
- 11.3 T·m
- Xmax Linear excursion
- 5.52 mm
- Le Voice-coil inductance
- 0.6 mH
- SPL Sensitivity (1 W/1 m)
- 96 dB (1 W/1 m)
- EBP Efficiency bandwidth product
- 93
- Xdamage
- 13.1mm
- Eta Zero
- 1.20%
- Net Volume
- 0.044 ft3
Measured response
About this driver
FaitalPRO's 10F300 10" professional midbass uses a large 2" voice coil and powerful ferrite magnet to handle up to 250 watts RMS while producing incredible output levels. Featuring a waterproof treated paper cone, rugged steel frame, vented motor, and flat response, this flexible driver is will excel as a high output midbass or midrange.
FaitalPRO’s FE300 series has been designed and built as a direct response to the overwhelming demand for an evolved and more powerful series of products which would enhance the universally successful FE200 series. Building on this original idea FaitalPRO brought a brand-new family of products to life. All of the FE300 drivers are equipped with a powerful ferrite magnet assembly and a stamped steel basket in keeping with the key characteristics of the popular FE series.
Capable of high output with smooth response up to 4,000 Hz, the flexible 10FE300 10” professional midbass is ideal for any application that requires high output capability. The waterproof treated paper cone has excellent damping properties to keep unwanted resonances under control and deliver natural and realistic response. With a 2” diameter voice coil on a heat resistant fiberglass former the 10FE300 can handle up to 250 watts RMS (500 watts maximum) for extended periods with minimal power compression. The powerful vented ferrite magnet system has been FEM optimized to deliver maximum efficiency while keeping coil temperature under control even at maximum power. Finally, a newly designed stamped steel basket creates a solid and lightweight foundation that can withstand the most stressful conditions. Thanks to its controlled response and high output capability, the 10FE300 can be used in a variety of installations, such as professional sound reinforcement systems, musical instrument applications, or even high SPL car audio and motorsports systems
Used in designs
No published design uses this driver yet.
Downloads
Free, no login neededVersions
Frequency response files
| 10FE300_0deg.frd | FRD frequency response | 14 KB |
| 10FE300_45deg.frd | FRD frequency response | 14 KB |
Other measurement files
| faitalpro-10fe300-spec-sheet.pdf | PDF document | 211 KB |
| faitalpro-10fe300-technical-drawing.pdf | PDF document | 731 KB |